Tools

USB charger for your Harley or Motorcycle. The fully sealed in-line SAE to USB 3300mA charger with 80" of cable, delivers safe and fast USB charging to your phone or other device that needs charging, either on the handlebar or inside your tankbag or...

Easily add a USB charger to your Harley or Motorcycle. Built in protection turns off USB charging and prevents your parked vehicle's LFP (LiFePO4) or AGM (Pb) battery from draining - starts back up when vehicle fires up Creates weatherproof seal...

Maintain any type of 12V batter or lithium battery with the Optimate 1. Tests and delivers only what the battery needs without ever overcharging or undercharging Maintains any type of 12V lead-acid or 12.8V lithium battery from 2Ah-20Ah Global input...

Recover a neglected or discharged battery or rapidly recharge & optimize the performance of 12V Batteries on your Harley or other Motorcycle with the Optimate 5 Global charger. Rapidly charges and optimizes the performance of 12 V...

Maintenance charger or recover a neglected battery on your Harley or other Motorcycle with the Optimate 3 Global charger. Fully electronic, lighter weight, global input (100-240Vac 50-60Hz), fully sealed, more advanced desulfation and maintenance...

Leave the cylinder head on the bike and swap your springs. Save time doing the job. Fits: Harley M8 Engines Once the cylinder is filled with compressed air, the technician can easily rotate the tool and compress the top collar of the valve spring...

TechMate OptiMate USB charger allows you to charge your phone, GPS, or tablet on your motorcycle with a weatherproof charger. Charge your phone, GPS, camera & tablet with your weatherproof charger, on your motorcycle or up to 80" / 200cm away from...

Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts Made of non-marring Delrin® Instructions included Made in the U.S.A.

Make your life easier with the Motion Pro Deluxe Piston Pin Tool. Interchangeable piston adapters Made of durable 6061 aluminum Fits all piston pins from 13mm (.511") to 24mm (1") Works on both full skirt and short skirt (slipper)...

Main Seal Remove/Installer from Jims for the Harley Twin Cam. Fits: 1999-2016 Harley Twin Cam Remove and install crankcase main seal while engine is still in chassis Hardened steel construction Includes necessary adapters for 88 and 96 Twin...

Left Main Seal Remover from Jims for the Harley M8. Fits: 2017-2019 M8 Engines Remove crankshaft oil seal without damaging crankcase bore Made in the U.S.A.

Cylinder Torque PLates from Jims for the Harley M8. Fits: 2017-2019 M8 Engines Torque plates must be used when boring or honing late-model aluminum cylinders Simulates running stress conditions Instructions included Made in the U.S.A.

JIMS Wrist Pin Remover adapter for the M8. Fits: M8 Engines Quickly and easily removes wrist pins from Milwaukee Eight™ engines Used with existing wrist pin tool PART #1276 (sold separately) Made in the U.S.A.

Valve Spring Colllar for the M8. Fits: M8 Engines For use with JIMS existing valve spring compressor PART #96600-36B (sold separately) Valve spring collar allows existing compressor to remove smaller valves on Milwaukee Eight™ engines Made in...

Keep the cylinders in place when pulling the heads. Fits: M8 and 99-17 Twin Cam Engines Helps to keep the cylinders in place when removing the heads from the engine One end fits Twin Cam® models and the other fits Milwaukee Eight™...

Easily and safely remove need bearing from the M8. Fits: M8 Engines Correctly and accurately replace the camshaft inner needle bearing in Milwaukee Eight™ engines Uses the proven JIMS® syle remover collet and fine threaded installation...

In a world gone digital, the Motion Pro Digital Tire Pressure Gauge gives you a quick and easy way to painlessly gauge your tire pressure. Built to do the job right and built to last. High-precision: accurate to +/- 0.6 psi 0-60 psi Precise digital...

CruzTools EKH2 Econo Harley Davidson Tool Kit High-quality budget tool kit Includes five combination wrenches, hex and Torx® keys, spark plug tool, 6-in-1 screwdriver and other roadside items Packed in a tough, double-panel polyester roll-up...

CruzTools EKH1 Econo Harley Davidson Tool Kit A comprehensive roadside kit for the budget-driven rider Contains five combination wrenches, 8" adjustable wrench, hex and Torx keys, spark plug sockets, 6-in-1 screwdriver, locking pliers,...

CruzTools RTH3 Roadtech Harley Davidson Tool Kit Combines the best features of the popular EconoKIT H1 and MiniSet tool kits into one roll-up pouch Includes mini ratchet and sockets, combination wrenches, locking pliers, adjustable wrench, 6-in-1...

Use whenever tappet blocks are removed, or even just loosened Tappet blocks do not have counter-bored bolt holes; therefore, they should be reinstalled using an alignment tool to ensure that the lifters track properly on the camshaft This tool...