Electrical

Yuasa’s top-of-the-line GYZ High Performance Battery is designed to give you cranking amps & higher amp hour capacity for years of run time. Fits: 1999-2022 Harley Touring  FLT/​FLHT/​FLHX/​FLHR/​FLTR/​FLTRX/​FLTRU/​FLTRK and H-D FL...

Namz Front Turn Signal Extension Harness for most Harley models. Fits: 1999-2015 Softial, Dyna and Sportster Models A must when installing taller handlebars Intended for front turn signals mounted on handlebar switch housings De-pin factory harness...

Replace your worn out alternator stator with an OEM replacement from Drag Specialties. Replaces OEM #29987-06/A/B and 29900029 Fits: 2006-16 FLHT/​FLHR/​FLHX/​FLTR and HD FL Trike, 2014-16 FLHTKSE, 2015-16 FLTRUSE/​FLHXSE Repl. OEM #29987-06/A/B and...

Plug it in and boom, extended wiring. This replaces the original harness with a longer one - choose the length necessary for your setup. Fits: 2018-2023 Harley Road King FLHRXS Plug-N-Play wiring harnesses to complete your handlebar wiring job Made...

Namz Front Turn Signal Extension Harness is a must if your running taller handlebars on your bike. No crimping required! Select correct length for your application. Fits: 2016-2021 Harley Softail Models A must when installing taller...

Move your gauges up to a more desirable position with the help of this harness from Guerrila Cables. Fits: Harley M8 Softail FXLR and FXLRS Easy plug and play installation Matches OEM harness

Change the length of your Single Gauge Harness on your M8 Softail whether it be for a riser swap or gauge change. Fits: Harley M8 Softail with Single Gauge Factory style connectors for exceptional performance

Easily and quickly add some extra length to your Harley CAN-Bus handlebar wiring. Fits: 2014-Later Sportster®, 2011−Later Softail®, 2012-2017 Dyna®, and 2014-Later Bagger Models Color-Coded to match OEM wiring Right Hand is 5-wire...

Extended harness is ideal when adding taller risers and/or bars to your Harley model with throttle-by-wire. Allows for a clean install. Fits: 2016-LATER...

Extended harness is ideal when adding taller risers and/or bars to your M8 Softail with digital gauge. Plug and play install. Fits: SOFTAIL STREET BOB (FXBB) 2018-2020 SOFTAIL STREET BOB (FXBBS) 2021-Later SOFTAIL BREAKOUT (FXBR,...

Chrome replacement Ignition Switch from Drag Specialties. Replaces OEM# #71313-96A Fits: 1993-11 FXDWG, 2008-11 FXDC/​FXDF, 2000-10 FXST/​FLST, and 1999-13 FLHR MODELS Comes with 2 Keys Chrome Finish Fitment 2010 Harley-Davidson Fat...

Gloss Black replacement Ignition Switch from Drag Specialties. Replaces OEM# #71313-96A Fits: 1993-11 FXDWG, 2008-11 FXDC/​FXDF, 2000-10 FXST/​FLST, and 1999-13 FLHR MODELS Comes with 2 Keys Gloss Black...

Save time wiring your handlebar swap. Kit includes everything you need for the job. Cut-to-Length design. Made in the USA Fits: 1996-2006 Harley FLHT/FLTR/FLHR Models (Does not include wiring for electron throttle) Saves time by streamlining...

Easily extend your wires when you put taller bars on your bike. Color coded to easily connect. Fits: 2016-17 SOFTAIL, FXDLS, 2016-2021 Harley Touring FLHTCU/​FLHX/​ FLHR/​FLTRX/​FLTRU/​FLTRK and H-D FL TRIKES Designed and tested to extend your wiring...

Allows the use of TBW bars on cable bikes. Fits: Custom Applications Plug the electronic throttle control notches on TBW (Throttle-By-Wire) handlebars Allow the use of TBW bars to be used on non-TBW bikes Equals out the right and left side of the...

Plug it in and shazam, extended wiring. This replaces the original harness with a longer one - choose the length necessarty for your setup. Fits: 2014-2023 Harley Electra Glide, Road King, Street Glide, Road Glide and FL Trike...

Used when relocating the gauges on Road Glide models. 20" Length. Fits: 2015-2022 Harley Road Glide Models Allows for easy relocation of speedo/tach cluster when using tall risers Fitment 2020 Harley-Davidson Road Glide Limited...

Replace your stock Harley cowbell with a Carbon Fiber cover from Slyfox. Fits: Harley Models with Cowbell style horn cover Fits the OEM horn Mounts to existing hardware Carbon fiber construction Gloss Finish

Replace your stock Harley cowbell with a Carbon Fiber cover from Slyfox. Fits: Harley Models with Cowbell style horn cover Fits the OEM horn Mounts to existing hardware Carbon fiber construction Matte Finish

Save time and make your handlebar install easier. Fits: 2007-2013 Universal application (Except Touring models, 11-13 Softail, 12-13 Dyna) Saves time by streamlining handlebar wiring jobs Kits include all the materials necessary to extend the wires...

Sumax 8mm Spark Plug wires for the Harley FXDR Softail Models. Precut with plug/coil boot & terminals already installed. Low resistance so they run cooler and last longer. Fits: 2018-2020 FXDR Softail Precut and have the plug/coil boots and...

Sumax 8mm Blue Spark Plug wires for Harley M8 Softail Models. Precut with plug/coil boot & terminals already installed. Low resistance so they run cooler and last longer. Fits: 2018-2020 M8 Softail Models Precut and have the plug/coil boots and...

Sumax 8mm Red Spark Plug wires for Harley M8 Softail Models. Precut with plug/coil boot & terminals already installed. Low resistance so they run cooler and last longer. Fits: 2018-2020 M8 Softail Models Precut and have the plug/coil boots and...

Sumax 8mm Spark Plug wires for the Harley M8 Softail Models. Precut with plug/coil boot & terminals already installed. Low resistance so they run cooler and last longer. Fits: 2018-2020 M8 Softail Models Precut and have the plug/coil boots and...

Sumax 409 Pro Race 10.4mm Spark Plug wires for the Harley M8 Softail Models. 10.4mm gives that fat look. Blue Color Fits: 2018-2020 M8 Softail Models Precut and have the plug/coil boots and terminals already installed Boots and wires are made from...

Sumax 409 Pro Race 10.4mm Spark Plug wires for the Harley M8 Softail Models. 10.4mm gives that fat look. Red Color Fits: 2018-2020 M8 Softail Models Precut and have the plug/coil boots and terminals already installed Boots and wires are made from...

Sumax 409 Pro Race 10.4mm Spark Plug wires for the Harley M8 Softail Models. 10.4mm gives that fat look. Fits: 2018-2020 M8 Softail Models Precut and have the plug/coil boots and terminals already installed Boots and wires are made from...

NAMZ Speedometer & Instrument Extension Harness, 24″ Fits 2015-2020 Road Glide Only. Allows for easy relocation of speedo/tach cluster when using tall risers. Fits: 2015-2021 Harley Road Glide Models 24″ long OEM wire colors,...

Drag Specialties Premium Voltage Regulator. 22 AMPS. Fits: 04-06 Sportster XL - Repl. OEM #74523-04 Two years of development and design went into producing a superior regulator Fully assembled in the USA with domestic made electrical boards Tested...

Replacement Transmission Neutral switch for your Harley from Standard Motorcycle products. Fits: 2007-2020 Softail/Touring, 2007-2017 Dyna models; repl. OEM #33926-06B Zinc-plated OEM replacement switches OEM...

Replacement Transmission Neutral switch for your Harley from Standard Motorcycle products. Fits: 1999-2020 Harley Sportater and 1999-2008 Buell; repl. OEM #33900-99 Zinc-plated OEM replacement switches OEM...

Easily add a touch of style with a Black Ball Milled Pro One Ignition Switch Cover. Fits: 2007-2013 Harley Touring FLHT/FLTR/FLHX and FL TRIKE Models Fits quickly and easily over your stock switch knob CNC-machined from solid billet aluminum Simple...

Easily add a touch of style with a Chrome Ball Milled Pro One Ignition Switch Cover. Fits: 2007-2013 Harley Touring FLHT/FLTR/FLHX and FL TRIKE Models Fits quickly and easily over your stock switch knob CNC-machined from solid billet aluminum...

Easily add a touch of style with a Black Pro One Ignition Switch Cover. Fits: 2007-2013 Harley Touring FLHT/FLTR/FLHX and FL TRIKE Models Fits quickly and easily over your stock switch knob CNC-machined from solid billet aluminum Simple...

Easily add a touch of style with a Chrome Pro One Ignition Switch Cover. Fits: 2007-2013 Harley Touring FLHT/FLTR/FLHX and FL TRIKE Models Fits quickly and easily over your stock switch knob CNC-machined from solid billet aluminum Simple...

Reposition the coil below the neck and between the frame down tube on the front of the bike with Jim's M8 relocation kit. Fits: 2018-2020 Harley Softail Models Re-positions and mounts the coil below the neck and in-between the frame down tubes on the...

Improves your new M8 starts/stops and overall performance from your motor with Drag Specialties Black Ignition coil. Designed to replace OEM #31600067 Fits: 2018-2020 Harley Softail Models Repl. OEM# 31600067 Improves overall performance including...

Easy to use and plugs right-in for Softail, Dyna and Sportster CAN-Bus models. Fits: 11-Up Softail, 12-16  Dyna and all 14-20 Sportster XL models (except V-Rod) All the items needed to successfully extend the wiring to a set of OEM H-D handlebar...

Need to relocate the gauge on your 2018-Up Softail? The Namz 32" plug n play extended Harness will get the job done. Fits: 2018-2020 Harley Softail FXDR, Breakout, Standard & Street Bob (FXDR/FXBRS/FXBR/FXST/FXBB) Used when installing taller...

Fits: '08-'13 TBW Harley Touring Models Wiring extension kits for electronic throttle control Feature OEM-match color-coded wires with factory connectors Work for most handlebar heights (up to 20" Ape Hangers) Made in the U.S.A...