Flathead Parts

WL magneto adapter mounts the magneto to the generator position on 45 W and G engines, featuring a machined alloy construction with a natural finish.Includes 2 5/16"-18 flathead screws. *NOTE: Machining may be required on some applications. ...

Chrome 6 volt 7" vintage headlamp includes 6 volt guide sealed "Cycle Beam " beam.Bracket is not included. *NOTE: For show or decorative use only and are not D.O.T. approved. FITS:FLH 1949-1984

Kit includes chrome knob, zinc top cap, seal, spring, screw, and washers.Lower brass washer not included FITS:FL 1941-1965

Raw steel emblem/trim mount strip set is specifically for 1936-1946 models, but can be attached by spot welding to any 3-1/2 gallon fat bob tank set.Sold as a set of four. *NOTE: Order trim and emblems separately. FITS:EL 1936-1946FL 1941-1946U...

Top triple tree with cover and pin, for Spring Fork front end. Cover features a polished finish over stainless steel.Restoration quality! Handlebar lock plate has pin to lock top cone nut in place. FITS:EL 1936-1940FL 1936-1945WL...

Rigid frame parkerized vibrator bar fits between side car loops. FITS:EL 1936-1940FL 1941-1957

Replica ignition coil is steel jacketed and includes nut, packing and wires. The 6 volt coil replaces those on 1930 - 1947 models with a black finish. Use coil mount kit to clamp to frame tube.Includes 2 stainless steel 8-32 x 5/8" round head screws...

Stainless steel 40 spoke nipple set is 22mm long. FITS:WL 1936-1952 Front

Replica oil deflector is for a 3-brush generator. FITS:EL 1936-1940FL 1941-1957VL 1930-1934UL 1937-1948

Scavenger oil pump cover features cast iron construction.This is the outer cover only, without internals. Order hardware separately. *NOTE: Features the chain oiler provision. FITS:W 1941-1952G 1941-1973UL 1945-1945

Replica Straight Leg Rigid frame with cross tube is for chain drive models. This frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30° neck rake. Forged parts include: neck, front and rear engine mount, side car...

3.5" Gallon bobbed gas tank with emblems with 1959-1960 Harley FL Fits:FL 1959-1960 Bobbed gas tank set has provision for shut off rod with a fuel capacity of 3.5 gallons. Emblems are included and the tank set features mount strips welded to each side...

3.5" Gallon bobbed gas tank with emblems with 1955-1956 Harley FL Fits:FL 1955-1956 Bobbed gas tank set has provision for shut off rod with a fuel capacity of 3.5 gallons. Features emblem mounts for emblems, which are included. Screws not included. Tank...

3.5" Gallon bobbed gas tank with emblems with 1951-1954 Harley FL Fits:FL 1951-1954 Bobbed gas tnak set has provision for shut off rod with a fuel capacity of 3.5 gallons. Order shut off rod and seat kit separately. Mount strips are welded to each side...

3.5" Gallon bobbed gas tank with emblems with 1947-1950 Harley FL Fits:FL 1947-1950 Bobbed gas tank set has provision for shut off rod with a fuel capacity of 3.5 gallons. Order shut off rod and seat kit separately. Mount strips are welded to each side...

Black adjustable transmission mounting plate for Harley models. Fits: FL 1936-1984FX 1971-1984 Adjustable transmission mounting plate with a black finish. Features built in adjuster screws for a positive and even adjustment. The built in dual...

Chrome adjustable transmission mounting plate for Harley models. Fits: FL 1936-1984FX 1971-1984 Adjustable transmission mounting plate with a chrome finish. Features built in adjuster screws for positive and even adjustment. The built in dual...

Brown velo racer seat features thin profile with leather construction. This is cobbler ground and sanded edge type. Fits: Custom Applications Seat is on a formed steel baseplate with bolt holes 6-5/8" center to center for custom mount application...

Black, solo, thin profile seat has leather construction. It is cobbler style with ground edge on a stock formed steel baseplate with front and rear bolt holes. Fits: Custom Applications Rear holes are 6-5/8" from center to center for custom mounting...

Raw finish gas tank set, accepts gas only on both sides, 5 gallons. Tanks has 2 3/8" NPT fittings on each tank half. Fits:W 1936-1952 Tank includes 2-1/2 gallon per side for gas only. Tank does not have provision for instrument dash panel or fuel shut...

WR narrow type 45" 2.5 gallon gas tank set holds gas on both sides and features raw finish. Tank set has 2 3/8" NPT fittings on each side, for gas and oil lines. Tank uses two vented gas caps, which are not included. Fits:W 1936-1952WR 1941-1952 Does not...

WR narrow type 45" 3 gallon gas tank set holds gas on both sides features raw finish. Tank set has 2 3/8" NPT fittings on each side, for gas/oil lines. Tank uses two vented gas caps, which are not included. Fits:W 1936-1952WR 1941-1952 Does not accept...

Replica Style frame for the Harley 45. Replaces OEM #2802-37N All frames are from brazed construction and is shipped with a raw finish. Don't forget the pre-assembly procedure! Before primer and paint, the frame will require de-greasing. Frame accepts 3...

V-Twin Stock Replica Inline Spring Fork for 1941-1945 Harley Big Twin Complete Assembly. Fits: FL 1941-1945UL 1941-1945 Kit includes front and rear black powder coated legs, outer springs, rockers, and zinc plated rocker studs. It comes completely...