Kraus Motor Co.

KRAUS 49mm Triple Trees are the foundation of a strong, properly engineered front end.KRAUS 49mm Triple Trees are engineered and designed to improve the handling and behavior of your Harley Dyna...

Made from 7075 Aluminum for good wear resistance, the Kraus BST Cut Sprocket combines style and top performance for your Harley. These sprockets are light and decrease rotating mass for faster spin...

Kraus Drop Trees are designed to get extra height out of a inverted front motorcycle suspension. Kraus Drop Trees add 1.5" of height and have a proprietary geometry to improve performance and...

These handy custom designed, precision fit pieces allow you to run a lightweight composite fender with the Kraus Dynamoto forks. Fits Dynamoto forks and stock replacement composite fenders Will...

The Kraus Dynamoto Fender Kit comes with all the mounting hardware to bolt right up to the Kraus Ohlins R&T forks and front end kits. Gloss Black Gel Coat Finish Use with 17"-19" front...

When running stock fender mounts, these guards bolt onto the front of your Ohlins Dynamoto forks to help protect your inner fork tubes and seals from grime and damage. Grab them in black or polished...

The Kraus Radial Caliper Mounts allow you to run 108mm radial brake calipers on the Ohlins forks. Designed to run your stock 292mm Harley brake rotors when using certain aftermarket radial...

Kraus Motor Company has designed and engineered the DYNAMOTO SP INVERTED FRONT END to be the absolute best performance suspension product for Harley-Davidson™ motorcycles.The Dynamoto SP...

The Kraus Dynamoto Stock Fender Mounts allow you to easily run a stock or aftermarket 2006-2017 Harley Dyna 49mm front fender on your Kraus SP Dynamoto Inverted Front End.

KRAUS Triple Trees are the foundation of a strong suspension. Our KRAUS Dynamoto Triple Trees are the best for the application. KRAUS Dynamoto Triple Trees are machined from solid billet, anodized...

Get your bars set the right way with the Kraus ERG Moto Bars. These bars are designed for pure individuality. Fine tune the angle and sweep of your bars to fit your body and riding position. Simply...

Black Kraus ERG One Floorboards for Harley Bagger models. Put your feet in the right place Increase rider comfort and control with the One Floor Boards. Designed for Aggressive Comfort, the One...

Polished Kraus ERG One Floorboards for Harley Bagger models. Put your feet in the right place Increase rider comfort and control with the One Floor Boards. Designed for Aggressive Comfort, the One...

Increase rider or passenger comfort with a larger foot platform. Designed for Aggressive Comfort, the One Mini Boards are adjustable 1" forward to rear so you can get your legs and feet in the...

Increase rider or passenger comfort with a larger foot platform. Designed for Aggressive Comfort, the One Mini Boards are adjustable 1" forward to rear so you can get your legs and feet in the...

1-1/8" Moto Bars for use with Stock Harley Hand Controls. These moto style bars feature the typical 1-1/8" riser clamping area but taper down to 1" to accommodate stock Harley hand controls and...

Upgrade to Radial brake calipers with these easy to install mounts. Use aftermarket 108mm radial brake calipers on 2000 and up stock Harley forks. The increased fluid capacity of aftermarket radial...

The Kraus Isolated Riser is the solution for bad handling bars, crafted to be a performance piece that looks the part. Utilizing the supplied billet bushings, the Isolated Riser is designed to be...

Increase rider comfort and control with the Kraus Motor Co. Kickback Isolated Riser. The Kickback moves the bars 1.5" towards the rider.Our Kickback Isolated Riser utilizes the exact same technology...

Using advanced engineering and high quality manufacturing in the USA, the Kraus KRT Inverted Front End offers the Harley-Davidson™ enthusiast the option to convert their Harley FLH/FLT into a...

Made from 7075 Aluminum for good wear resistance, the Kraus Marchesini Cut Sprocket combines style and top performance. These sprockets are light and decrease rotating mass for faster spin up and...

The Kraus Softail Digital Gauge Mount is a light weight billet aluminum housing for the M8 Softail Digital Gauge, available in either black or polished finish. If you have a M8 softail then this is...

Hands down - the Moto Pro Digital Display is the most advanced digital motorcycle dashboard gauge on the market. It allows you to measure anything imaginable, deliver all sorts of data at a moments...

The Moto Pro Digital Display Mount is designed to mount the Motogadget Motoscope Pro Digital Dashboard unit to your handlebar risers, The Kraus Isolated Risers or Harley OEM top clamp depending on...

Use these Kraus Radial Hardware kits to mount radial brake calipers to Kraus Front or Rear Radial Brake Caliper Mounts. 2.5mm Spacers stack to form all commonly needed spacing For use with...

The Raptor Pull Back Plate is for Road Glides. Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" so that you can mount any standard risers and they...

The KRAUS Touring Rear Radial Caliper Mount is machined out of billet aluminum and allows you to run a single 108mm radial caliper on the rear of your Touring bike. It looks great and will complement...

The Softail Rear Radial Caliper Mount allows you to run a single 108mm radial caliper on the rear of your 2018-Up Softail. Choose a polished or black anodized finish. For stock replacement 108mm...

The KRAUS Dyna Rear Radial Caliper Mount is machined out of billet aluminum and allows you to run a single 108mm radial caliper on the rear of your FXD/Dyna. Offered in 1'', 3/4'' and 25mm...

Allows you to run a radial caliper on the rear of your FXR for Stock FXR swingarms. If you are running an aluminum Swingarm then you'd want to opt for the Kraus Universal Rear Radial Caliper Mount...

Check out the Kraus Resi Mounts for HD 357 and HD 044 Ohlins Shocks, so you can showcase your premium shocks the right way. Resi Mounts allow you to mount your Ohlins Remote Reservoirs on the rear...

The Kraus RG Billet Gauge Bezel allows you to ditch your stock plastic gauge housing and clean up your Road Glide dash.  This beautifully machined piece encases your stock Harley gauges and...

Kraus Drop Trees are designed to get extra height out of a inverted front motorcycle suspension. Kraus Drop Trees add 1.5" of height and have a proprietary geometry to improve performance and...

The Kraus Stocker Gauge Adapter allows you to mount an OEM Harley gauge bezel straight to the Isolated Risers Top Plate. This will work for OEM Dyna, Sportster, and FXR riser mounted gauge mounts.

The T-Rex Pull Back Plate mounts to the top of the triple tree and moves your bar mounts towards the rider 2.5" while adding about 1" of height. The T-Rex Plate moves the bars back towards the rider...

The Kraus Universal Rear Radial Caliper Mount allows you to run a 108mm radial caliper on the rear when running an aftermarket aluminum swingarm. Use a 3/8" Heim Joint to attach the bracket to your...

Kraus Vector One Axle Adjuster Kit in a black finish. Fits: 2009-2020 Harley Road Glide, Street Glide, Electra Glide and Road King Models Keep your belt or chain tensioned and your wheel aligned...

Kraus Vector One Axle Adjuster Kit in a Polished finish. Fits: 2009-2020 Harley Road Glide, Street Glide, Electra Glide and Road King Models Keep your belt or chain tensioned and your wheel aligned...

Your top Tree Clamp is an essential part of a performance front end setup. The Kraus Wolf One Top Clamp has been engineered and designed with a broader cross section offering increased axial strength...

The Wolf One Pro Kit is the top of the line, giving you a high class all billet performance setup. The Kickback Isolated Risers and Fly Moto Bars offer an aggressive upright body position. The RG...