RM Stator - Improved Capped Magneto Flywheel Rotor for 2006 Harley Touring - Repl OEM# 2994306

Product Description

Introducing RM Stators Newest Heavy Duty Flywheel Rotor For Harley Davidson Motorcycles.

Anyone who rides or repairs the Harley Davidson Motorcycle is probably familiar with the flywheel problems common to these models. Most of these bikes will have at least one flywheel failure in their lifetime so far. Low quality epoxy was used on OEM flywheels to secure the magnets to the rotor body. Over time and many heat cycles, the epoxy fails allowing the magnets to come loose and contact the stator, potentially causing catastrophic damage.

For years, service shops & dealerships have offered low-cost repairs for Harley flywheels to save the cash for an OEM replacement. This sounds like a great idea at first, but there are some serious issues! The common repair is using JB Weld Marine Blue Epoxy to reattach the loose original magnets, or to install new ones. Epoxy fixes do repair flywheels in the short term, if they are done correctly. However, this kind of repair can easily cause immediate problems, and impact long term reliability.

A Heavy Duty Flywheel to the rescue! The RM STATOR heavy-duty flywheel rotor for Harley Davidson Motorcycles is a well-priced solution to problems with the OEM flywheel, and an excellent alternative to all the mechanical troubles you can encounter with a repair. Don't waste time with temporary solutions and start fixing your ride like a pro!

Fits: 2006 Harley FLHT/​FLHX/​FLHR/​FLTR Models - Repl. OEM# 2994306

Features

• Built to OEM size - Fits precisely in your ride: install it and forget it.
• Improved epoxy - Uses high temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment.
• High grade steel capping - Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.
• Precise balancing - Eliminates crankshaft vibrations for longer engine longevity.
• Shop with confidence - One year warranty. All products are tested. 

Dimensions

• Exterior Diameter: 163 mm
• Interior Diameter: 145 mm
• Interior Diameter Center Housing: 26 mm
• Thickness (exterior): 42 mm
• Thickness (interior): 36 mm

Why Cheap Repairs Won't Work

• Quick stronger epoxy fixes do repair flywheels in short term. It might however impair long term performance and reliability of your ride.
• Remaining OEM magnets: Original magnets remaining can still come loose at any time.
• Magnet alignment: The alignment of magnets around the flywheel is critical for proper stator operation. Even very fine misalignment will reduce stator efficiency significantly.
• Magnet spacing: Excessive epoxy or incorrect magnet spacing around the flywheel can easily affect the flywheel balance. This can cause stator contact or even crankshaft damages.
• Incorrect replacement magnets: The magnetic field strength of new magnets MUST match the originals. Stator failure can occur quickly with stronger magnets and stator output can be decreased significantly using weaker magnets.
• Wrong epoxy properties: Epoxy that is not rated to permanently handle high temperatures and oil immersion can quickly cause a serious failure.
• Oil contamination: Wrong epoxy for the application can also contaminate the crankcase oil, damaging the motor.