Product Description
Renthal 850 High Rise 1" V-Twin Handlebar for Harley-Davidson
Bring Renthal's motocross-inspired performance and control to your Harley-Davidson with the Renthal 850 High Rise V-Twin Handlebar. Designed specifically for V-Twin motorcycles using 1" handlebar clamps and controls, the 850 High Rise provides a taller, more upright riding position with increased leverage and a commanding performance-oriented stance.
The 850 High Rise measures 31-5/8" wide with approximately 3-5/16" of rise, 4-3/4" of overall height and 2-3/16" of sweep. The taller profile makes it an excellent choice for riders looking for additional height and leverage without moving to a traditional tall T-bar or ape hanger setup. Its wide stance provides responsive steering input while the moderate sweep maintains a natural reach to the controls.
Renthal designed its V-Twin handlebar line specifically around the requirements of Harley-Davidson and other American V-Twin motorcycles. The bar maintains a full 1" diameter through the clamp and control areas for compatibility with appropriate 1" risers and controls. Internal wiring slots provide a clean installation, while the notched throttle-side end accommodates compatible Harley-Davidson throttle-by-wire systems.
Finished in black, the Renthal 850 High Rise is an excellent option for performance baggers, Dyna builds, Softails and other custom V-Twin motorcycles where control, leverage and a motocross-inspired appearance are priorities.
Fitment
Fits a wide range of Harley-Davidson and other V-Twin motorcycles equipped with compatible 1" handlebar clamps and controls.
Throttle-by-Wire: Features a notched throttle-side end for compatible Harley-Davidson throttle-by-wire applications using the traditional notched handlebar configuration.
Internal Wiring: Slotted to allow compatible handlebar control wiring to be routed internally for a clean installation.
Important: Does not fit 2023-2024 CVO Street Glide (FLHXSE) or CVO Road Glide (FLTRXSE), 2024 Street Glide (FLHX), Road Glide (FLTRX) or CVO Road Glide ST (FLTRXSTSE), or 2025 Softail models. These motorcycles use Harley-Davidson's updated electronic throttle control system and do not use the traditional notched throttle-side handlebar configuration.
Note: Verify riser clamp diameter, control compatibility, throttle configuration, wiring length, brake line length and clutch cable or hydraulic line length before installation. Fitment depends on the complete handlebar and control configuration.
Specifications
- Width: 804mm / 31-5/8"
- Overall Height: 120mm / approximately 4-3/4"
- Rise: 84mm / approximately 3-5/16"
- Clamping Width: 150mm / approximately 5-7/8"
- Sweep / Pullback: 56mm / approximately 2-3/16"
- Control Length: 200mm / approximately 7-7/8"
- Handlebar Diameter: 25.4mm / 1"
- Bend: High Rise
- Finish: Black
Features
- High Rise V-Twin handlebar inspired by Renthal's motocross heritage
- Taller profile provides an upright riding position with increased leverage
- 1" diameter throughout for compatible Harley-Davidson risers and controls
- 31-5/8" overall width
- Approximately 3-5/16" rise
- Approximately 4-3/4" overall height
- Approximately 2-3/16" sweep / pullback
- Slotted for clean internal wiring installation
- Notched throttle-side end for compatible throttle-by-wire applications
- Aluminum construction
- Black finish
- Ideal for performance bagger, Dyna, Softail and custom V-Twin builds with compatible controls
- Renthal Part Number: 850-60-BK
- Drag Specialties Part Number: 0601-7055
| MPN | 850-60-BK |