Feuling Race Series 465 Cam Kit for Harley Milwaukee 8

Wake up the Milwaukee Eight with the 465 Race Series Cam Kit from Feuling.

Fits: 2017-2018 Harley Milwaukee Eight

• Include camshaft, lifters and a cam installation kit that includes the cam bearing and cam/ crank hardware
• Kit also includes gasket/O-ring kit that allows installation of Feuling Heavy-Duty HP+ .0165" wall one-piece pushrods or factory one-piece pushrods
• Race Series ® kit includes Race Series ® lifters

NOTE: Due to the unstable nature of this 4 ‑valve engine design with one rocker arm activating two valve springs, Feuling highly recommends running one ‑piece pushrods over quick ‑install adjustable pushrods to maintain maximum cam/ valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.

NOTE: Feuling fastener kit PART #3047 is also highly recommended to help prevent cylinder head cracking; kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress of the rocker shaft standoffs (sold separately)

Cam Part # 1343 RPM range 1,850 - 5,950. Grind: 465

Valve Lift Open Close Duration @ 50 lift @ TDC Lobe Centerline

Intake .445 4 BTDC 23 ABDC 207 .100 99.5

Exhaust .465 50 BBDC 6 ATDC 236 .100 112

RPM range: 1,850 - 5,950 Grind: 465 Overlap: 10

*Cam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES