Product Description
Death Metal Racing DMR Moto Handlebars Gen 2 - New Style Throttle By Wire - Harley-Davidson
Moto-inspired aluminum handlebars for Harley-Davidson models with new style (Gen 2) throttle-by-wire systems. 34" wide, 3-3/4" rise, minimal 1-1/2" pullback. 1" ends for stock Harley hand controls, 1-1/8" center riser clamping area. Hand control area parallel to ground with no awkward kickup at the end. Fits 23-24 CVO FLHXSE/FLTRXSE, 24 FLHX/FLTRX, and 25-up Bagger and Softail models with new throttle-by-wire (large new style switch housings). Will NOT fit original throttle-by-wire models. Will not work with heat grips where heat element goes inside bars. Strong, lightweight aluminum with machined lightning bolts on front side. Drilled and slotted for internal wiring. Works with DMR Destroyer risers and any riser accepting 1-1/8" bars. Available in multiple finishes: anodized colors, powder coat, chrome, raw aluminum.
Fitment
- 2023-2024 Harley-Davidson CVO FLHXSE Street Glide
- 2023-2024 Harley-Davidson CVO FLTRXSE Road Glide
- 2024 Harley-Davidson FLHX Street Glide
- 2024 Harley-Davidson FLTRX Road Glide
- 2025-Up Harley-Davidson Bagger models with new throttle-by-wire
- 2025-Up Harley-Davidson Softail models with new throttle-by-wire
- Models with large new style switch housings
- Will NOT fit original throttle-by-wire models
- Will not work with heat grips where heat element goes inside bars
Features & Benefits
- 34" Width - Wide, aggressive moto-inspired stance
- 3-3/4" Rise - Optimal height for comfort and control
- Minimal 1-1/2" Pullback - Measurement taken at end of bar, forward riding position
- 1" Ends for Stock Hand Controls - Works with factory Harley hand controls
- 1-1/8" Center Clamping Area - Fits DMR Destroyer risers and other 1-1/8" risers
- Parallel Hand Control Area - No awkward kickup at the end like other brands
- Gen 2 TBW Compatible - Designed for new style throttle-by-wire with large switch housings
- Strong, Lightweight Aluminum - Durable construction without excess weight
- Machined Lightning Bolts - Signature DMR styling on front side of bars
- Drilled and Slotted for Internal Wiring - Clean wire routing capability
- Multiple Finish Options - Anodized colors, powder coat, chrome, raw aluminum
Why Upgrade?
If you've got a 2023-24 CVO, 2024 Road Glide or Street Glide, or a 2025-up bagger or Softail with the new throttle-by-wire system, you need bars designed specifically for the large new style switch housings. Death Metal Racing's DMR Moto Handlebars Gen 2 are engineered for exactly that. These bars measure 34 inches wide (4 inches wider than the Gen 1 version) with a 3-3/4-inch rise and minimal 1-1/2-inch pullback (measured at the end of the bar) for a wide, aggressive moto-inspired riding position. Strong, lightweight aluminum construction with machined lightning bolts on the front side—signature DMR styling. The hand control area is parallel to the ground with no awkward kickup at the end like you get with other brands. That means comfortable wrist position and natural hand placement. 1-inch ends accept stock Harley hand controls with the new large switch housings, while the 1-1/8-inch center clamping area fits DMR's Destroyer line of risers and any other riser that accepts 1-1/8-inch bars. Drilled and slotted for internal wiring so you can keep your setup clean. Important: these bars are specifically designed for new style throttle-by-wire models. They will NOT fit original throttle-by-wire models. If you're unsure what you have, send DMR pics and they can help you determine compatibility. Will not work with heat grips where the heat element goes inside the bars. Available in multiple finishes: anodized colors, powder coat, chrome, or raw aluminum. Note: powder coat finishes are typically done per order with a 1 to 1-1/2 week turnaround. Anodized colors can vary slightly from batch to batch—no guarantee of perfect match with existing parts, and fading is possible with anodizing. If you've got a new style throttle-by-wire bike and want wide moto bars with proper ergonomics and DMR's signature style, these Gen 2 handlebars are built for you.
Note: Death Metal Racing DMR Moto Handlebars Gen 2 - New Style Throttle By Wire. Fits 2023-2024 CVO FLHXSE/FLTRXSE, 2024 FLHX/FLTRX, and 2025-up Bagger and Softail models with new throttle-by-wire (large new style switch housings). Will NOT fit original throttle-by-wire models. 34" width, 3-3/4" rise, minimal 1-1/2" pullback (measured at end of bar). 1" ends for stock Harley hand controls with new large switch housings. 1-1/8" center riser clamping area. Hand control area parallel to ground, no awkward kickup. Will not work with heat grips where heat element goes inside bars. Strong, lightweight aluminum construction. Machined lightning bolts on front side. Drilled and slotted for internal wiring. Works with DMR Destroyer risers and any riser accepting 1-1/8" bars. Finish options: anodized colors, powder coat, chrome, raw aluminum. Powder coat finishes done per order, 1-1.5 week turnaround. Anodized colors may vary slightly batch to batch; fading possible. Price: $199.95. Free shipping inside continental USA.
NOTE: THESE ARE CUSTOM MADE AND CAN NOT BE RETURNED
| SKU | DMR-25-Bars |