Product Description
Performance 465 Cam for the Harley M8. Gear Drive Cam.
Fits: 2017-2020 Harley M8 Models
- Bolt-in! Compatible with all stock valve train components
- 465G gear drive provide increased torque and horsepower
- Eliminates cam drive chain and tensioner
- Kits include all required bearings, o-rings, and hardware
- Gear drive cams provide improved valve timing accuracy
- Made in the USA
Required for installation:
- This cam requires Adjustable Pushrods. We recommend:
- 930-0123 Quickee Adjustable Pushrods with Cover Keepers for 2017-up M8 Models
Suggested:
- 330-0718 Precision Tappet Set Without HL2T Kit For 1999-'17 HD Big Twins, 2000-'20 HD® Sportster®, and 2017-up M8 Models (Tappets should be replaced every time that the cam is replaced)
- 330-0655 Tappet Cuffs for M8 Models
Intake | Exhaust |
Overlap
|
|||||||||||
Cylinder | Open BTDC | Close ABDC | Dur | Center | Valve Lift | TDC Lift | Open BBDC | Close ATDC | Dur | Center | Valve Lift | TDC Lift | |
Front | 2.6 | 14.6 | 197.2 | 96.0 | 0.462 | 0.087 | 30.1 | 8.8 | 218.9 | 100.6 | 0.462 | 0.109 | 11.4 |
Rear | 2.8 | 14.4 | 197.2 | 95.8 | 0.462 | 0.088 | 33.1 | 5.8 | 218.9 | 103.6 | 0.462 | 0.098 | 8.6 |
DISCLAIMER:NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.
Additional Information
MPN | 330-0624 |