Product Description
Custom Dynamics Shark Demon® 2 Performance LED Headlight - Harley-Davidson Street Glide 2023.5-2026
Upgrade your late-model Street Glide with the Shark Demon® 2 Performance LED Headlight—engineered specifically for the updated headlight mounting on 2023.5-2026 models with a direct OEM replacement delivering exceptional illumination. This DOT-compliant headlight produces 3,600 raw lumens (2,651 effective lumens) on low beam from three precision projection-style LEDs, then adds four direct-reflective LEDs for an impressive 9,080 raw lumens (4,485 effective lumens) total on high beam. The completely sealed IP67 waterproof assembly features a clear polycarbonate lens and gloss black aluminum housing for superior durability and optical clarity. Includes precision-engineered 3mm 304 stainless steel mounting bracket with OE-style headlight adjustability for proper beam aiming, plus plug-and-play wiring harness and all mounting hardware for direct factory replacement installation. No modifications required—this is a true bolt-on upgrade that replaces your stock LED headlight with enhanced Shark Demon performance while maintaining proper beam pattern and DOT compliance. The 5,800-6,500K daylight color temperature delivers crisp white light that's easier on your eyes and provides better contrast for reading road signs and spotting obstacles. Backed by Custom Dynamics' Lifetime Warranty and fitting all Street Glide variants from 2023.5-2026 including CVO models and the new Street Glide 3 Limited, this headlight brings cutting-edge lighting technology to the latest generation baggers.
Fitment
- 2023-2026 Harley-Davidson CVO Street Glide (FLHXSE)
- 2024-2026 Harley-Davidson Street Glide (FLHX)
- 2025 Harley-Davidson Street Glide Ultra (FLHXU)
- 2026 Harley-Davidson Street Glide Limited (FLHXL)
- 2026 Harley-Davidson CVO Street Glide Limited (FLHXLSE)
- 2026 Harley-Davidson CVO Street Glide ST
- 2026 Harley-Davidson Street Glide 3 Limited (FLHLT)
- 2026 Harley-Davidson CVO Street Glide 3 Limited (FLHLTSE)
- NOTE: For 2006-2023 Street Glide models, use part SD2-BW-W instead
Features & Benefits
- High-Performance Dual-Beam LED System - Low beam: 3,600 raw/2,651 effective lumens from three projection LEDs; High beam: 9,080 raw/4,485 effective lumens total
- DOT Compliant Design - Meets federal lighting standards for legal on-road motorcycle use with properly engineered beam pattern
- Plug-and-Play Installation - Direct OEM replacement with included wiring harness and mounting hardware, no modifications required
- 2023.5-2026 Specific Fitment - Engineered for updated headlight mounting on late-model Street Glide variants
- 3mm 304 Stainless Steel Bracket - Gloss black stainless steel mounting bracket provides OE-style headlight adjustability for proper beam aiming
- Projection + Direct-Reflective LED Technology - Three projection-style LEDs create precise low beam pattern, four direct-reflective LEDs add high beam coverage
- 5,800-6,500K Daylight Color Temperature - Crisp white light output for excellent visibility and reduced eye fatigue
- Low Beam Stays On with High Beam - Both beam patterns illuminate simultaneously for maximum forward lighting
- Gloss Black Aluminum Housing - Durable lightweight construction matches OEM aesthetic and integrates seamlessly
- Clear Polycarbonate Lens - High-impact lens material provides superior durability and optical clarity
- IP67 Waterproof Rating - Completely sealed assembly protects LED circuits from moisture, dust, and road spray
- Complete Installation Kit - Includes mounting bracket, plug-and-play harness, and all necessary mounting hardware
- Enhanced Output Over Stock - Significantly brighter and better beam pattern than factory LED headlight
- Lifetime Warranty - Backed by Custom Dynamics' legendary lifetime warranty against defects in materials and workmanship
- Engineered in USA - Designed and developed in the United States with focus on performance and durability
- CVO Model Compatible - Fits all CVO Street Glide variants including latest 2026 models
- Instant-On Performance - Immediate full brightness with no warm-up time required
Why Upgrade?
Harley-Davidson equipped the 2023.5 and newer Street Glide models with updated headlight mounting that differs from previous years, requiring a specific headlight solution for these late-model bikes. While these bikes come with LED headlights from the factory—a significant improvement over older halogen units—the stock LED still leaves performance on the table. The factory LED headlight prioritizes cost and regulatory compliance over maximum illumination, resulting in adequate but not exceptional lighting performance. When you're covering highway miles or navigating challenging nighttime conditions, lighting performance directly impacts your safety and riding confidence. The Shark Demon 2 Performance LED Headlight solves this by delivering a substantial upgrade over the factory LED with cutting-edge dual-beam technology. The sophisticated LED system produces 3,600 raw lumens (2,651 effective lumens) on low beam from three projection-style LEDs that create a precisely controlled beam pattern illuminating the road ahead without blinding oncoming traffic. Activating high beam adds four direct-reflective LEDs for an impressive 9,080 raw lumens (4,485 effective lumens) total—significantly brighter than the stock LED while maintaining proper DOT-compliant beam pattern. The effective lumen ratings represent actual usable light reaching the road surface, not inflated marketing numbers. The 5,800-6,500K daylight color temperature provides crisp white light that offers better contrast than the factory LED for reading road signs earlier and spotting potential hazards sooner. The low beam staying illuminated when you activate high beam is critical—it maintains precisely controlled foreground coverage while adding long-range visibility, maximizing total forward lighting. The installation is genuinely plug-and-play for these 2023.5-2026 models: the included 3mm 304 stainless steel mounting bracket is engineered specifically for the updated headlight mounting configuration, the plug-and-play wiring harness connects to your factory headlight connector, and the bracket provides OE-style adjustability for proper beam aiming. No cutting, splicing, or modifications required—if you can turn a wrench, you can install this headlight. The gloss black aluminum housing and clear polycarbonate lens provide clean OEM+ aesthetics that integrate seamlessly with your bike's existing styling, while the IP67 waterproof rating ensures reliability through rain, pressure washing, and road spray. This headlight fits all 2023.5-2026 Street Glide variants including the standard FLHX, CVO FLHXSE, Street Glide Ultra, Street Glide Limited, CVO Street Glide Limited, CVO Street Glide ST, and the new Street Glide 3 Limited models (both standard and CVO). Note that earlier 2006-2023 Street Glide models use different mounting and require part number SD2-BW-W instead. Whether you're upgrading a 2024 Street Glide Special, maximizing visibility on your 2025 CVO, or outfitting the latest 2026 Street Glide 3 Limited, this headlight delivers the performance upgrade that transforms your riding experience with significantly enhanced illumination over the factory LED.
Note: Part Number SD2-23BAT-W. Drag Specialties part number 2001-2844. Direct OEM replacement for 2023.5-2026 Street Glide models. Low beam: 3,600 raw lumens/2,651 effective lumens from three projection LEDs. High beam: 9,080 raw lumens/4,485 effective lumens total. 5,800-6,500K daylight color temperature. Gloss black aluminum housing with clear polycarbonate lens. IP67 waterproof rating. Includes 3mm 304 stainless steel gloss black mounting bracket with OE-style headlight adjustability, plug-and-play wiring harness, and all mounting hardware. Fits 2023-2026 CVO Street Glide (FLHXSE), 2024-2026 Street Glide (FLHX), 2025 Street Glide Ultra (FLHXU), 2026 Street Glide Limited (FLHXL), 2026 CVO Street Glide Limited (FLHXLSE), 2026 CVO Street Glide ST, 2026 Street Glide 3 Limited (FLHLT), and 2026 CVO Street Glide 3 Limited (FLHLTSE). NOTE: For 2006-2023 Street Glide models, use part SD2-BW-W. DOT compliant. Low beam stays on with high beam. Lifetime warranty. Engineered in USA. Installation instructions included.
Fitment
| 2026 | Harley-Davidson | Street Glide 3 Limited FLHLT | - | - |
| 2026 | Harley-Davidson | CVO Street Glide 3 Limited FLHLTSE | - | - |
| 2026 | Harley-Davidson | Street Glide Limited FLHXL | - | - |
| 2026 | Harley-Davidson | CVO Street Glide Limited FLHXLSE | - | - |
| 2025 | Harley-Davidson | FLHXU Street Glide Ultra | - | - |
| 2024-2026 | Harley-Davidson | FLHX Street Glide | - | - |
| 2023-2025 | Harley-Davidson | FLHXSE CVO Street Glide | - | - |
| MPN | SD2-23BAT-W |