Brocks West Coast Bagger Swingarm for 2009-2023 Harley Touring - Black

Brocks Black West Coast Bagger Swingarm for 2009-2023 Harley Touring. What do you get when you combine 25 years of sportbike drag racing and innovation with a V-Twin industry cry for a swingarm that can handle the ever-increasing demands of ultra-powerful baggers? Introducing the West Coast Bagger Swingarm™, by Brock’s Performance. Leaning heavily on technology proven in the ‘stupid fast’ turbocharged sportbike area, our tubing, bracing, billet aluminum ends and 28mm Chromoly axle configuration routinely control 750 hp/350 ft-lb no wheelie bar missiles in 6 second/220MPH action.

Adapting this winning combination for smooth operation and long street life for your FL, Brocks installed replaceable PTFE® lined spherical bearings from Worldwide Bearings at the pivot loops. Adding a bit of flexibility to the stance and chassis tunability in the rear, billet 3-position shock mounts (1/2-13 thread) are standard allowing for +2”, +1”, and stock height mounting positions. Speaking of flexibility, check out the billet bolt-on brake stay designed to function with the OEM brake hanger. In fact, Brock’s Performance Bagger swingarm is 100% bolt-on using your OEM rear wheel, spacers, and pulley or your favorite aftermarket replacement rear wheel.

Don’t forget the extra 3” length can be worth as much as 3 tenths improvement in the 1/4 mile. The bottom line, weighing in at a little over 1/2 the weight of the OEM swingarm and built to handle as much power as you can throw at it, moving/bent axles can now be a thing of the past, and you can look great and go faster too.

Fits: 2009-2023 Harley FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK Models - 25mm Axle

• Handcrafted 6061-T6 aluminum extended swingarm
• 100% bolt-on design can be used with OEM rear wheel, caliper, spacers and associated components
• Offset pivot mount increases oil pan clearance
• Offset mounting allows use of longer shocks
• Proprietary custom extrusion made exclusively for Brock's Performance
• Extends wheelbase from stock to 3 inches over
• Designed for use in high-power, high-torque applications
• Includes centerless ground hollow 4130 chromoly axle
• Reversible billet aluminum axle adjusters for easy wheel adjustments
• Includes caliper bracket for use with OEM calipers
• PTFE® lined spherical bearings from Worldwide Bearings preinstalled
• Includes bushings to use the OEM 3/4” pivot shaft
• Interior swingarm width measures 10 7/8” at the axle (accepts 200 series rear tire on 6.75” wide rim with chain conversion)
• 42% weight savings vs OEM swingarm (see the 'technical' tab for details)
• Designed, machined, and assembled in the USA
• Black powder coated finish

NOTES:

• 3-position shock mounts allow flexibility in ride height (+2”, +1”, stock)
• Compatible with shock lengths from 13” to 15”
• H-D Premium Ride Touring Shocks will only work in the +2” shock position

Exhaust Clearance Note: Due to potential changes in suspension geometry, additional clearance around the muffler may be required to avoid interference with the axle on some exhaust systems.

Attention: When spacing Bagger rear wheel, the overall width including spacers, brake hanger, etc. Must be: 10.875 in +.020in/-.000in / (276.22mm +.50mm/-.00mm)